Copyright 2006 The Janitorial Store
Oil Producing Algae In order to understand how to clean carpet, we need to know what
soil is and the problems it presents. Soil in carpet is any
substance that is foreign to the carpet's construction. Soil
includes substances such as dirt, sand, food, oil, hair, dust, and
anything else that finds its way onto carpet. Carpet not only traps
soils that fall onto it, but it also acts as a filter for the
environment. Dust, dander, soot, gases and odors are all trapped in
carpet.
Do you need a new fuel tank A replacement or maybe an auxiliary Don° fret, here at Parts Train we provide you with only the best. We have in stock a wide variety of fuel tanks that could serve you best. Not only that we also have fuel transfer tank, diesel fuel tank, auxiliary fuel tank, fuel oil tank, aluminum fuel tank, replacement fuel tank, truck fuel tank, custom fuel tank, fuel tank repair kit, inverted fuel tank, fuel tank gauges, fuel tank accessories, exterior fuel tank sealer and a whole lot more.
Algae Oil Production Most soil found in carpet is sand and dirt tracked in by foot
traffic. This type of soil is abrasive to the carpet and is what
causes the carpet to wear. The gritty matter actually cuts and
scratches the fibers of the carpet, resulting in a dull, worn
appearance. The rest of the soil found in the carpet is usually
grease and oils. This type of soil is acidic, which is why most
carpet cleaning chemicals are alkaline cleaners. Alkaline cleaners
neutralize the acids in order to remove the grease and oils.
Lubricity additives will not be added at the refinery to replace the reduced sulfur content. Some diesel fuel additives do contain lubricity additives. Advance Auto Parts carries Power Service brand diesel additives that contain a proprietary lubricity additive called "Slickdiesel", for maximum fuel lubrication. 5. Customer notices their diesel engine has lost power since the introduction of ULSD. Is this a result of the new fuels
Algae Bio Fuel Soil and dirt are considered "soluble" whereas oil, grease and
solids are considered "insoluble", which means they can't be
dissolved in water or solvents. Because soil and dirt are soluble,
they are more easily removed with vacuuming and extraction. However
it's the insoluble matter that professional carpet cleaners are
more concerned about.
Yes, ULSD fuels have a lower BTU value and thus when burned in a diesel engine will result in less power. Cetane enhanced products can offset this power loss. Cetane is a high energy compound that makes the fuel burn more completely in the combustion chamber, resulting in more power, reduced emissions, and improved fuel economy. Power Service diesel additives contain "+ Cetane Boost" to offset this power loss while also improving fuel economy and reducing emissions.
Algae Fuel Cell One of the problems inexperienced carpet cleaners have is
leaving residue in carpet. This is one of the main reasons they're
often called back to the job -- residue causes rapid re-soiling,
prompting phone calls from unhappy customers.
Natural gas, which is the cleanest fossil fuel, will not last another 100 years, although it may be possible to access vast frozen methane hydrate reserves from beneath the sea bed in the future. Nuclear Power Hydrogen may become a key fuel in the future as it is a clean alternative for vehicles and is in abundant supply. But it needs vast amounts of energy, so until renewable energy is widely available for the process it is likely to remain on the sidelines.
Algae Based Fuels What about "apparent" soil? Apparent soil isn't actually soil at
all. It's simply the worn appearance of the carpet that makes it
seem like it's dirty. Busy hallways often have wear patterns and
scratches in the fibers that simply can't be restored with
cleaning. When carpet cleaning contractors see carpets with these
conditions, it's best to explain it to the customer before work
begins so they understand that you won't be able to repair the wear
patterns.
ULSD was mandated by the Environmental Protection Agency (EPA) to be sold at all retail pumps by October of 2006. This new fuel is a reduced sulfur content formula of diesel fuel. Sulfur content went from 50 parts per million (ppm) to 15 ppm in this new fuel. The reduction of sulfur is mandated to reduce sulfur dioxide emissions 2. Do new diesel engines require use of ULSD
Diesel From Algae Following are the steps needed to remove soil from carpet:
Green Fuel Algae 1. Remove the dry soil, sand and solids by vacuuming.
Algae Fuel Production 2. Suspend the soil. This means separating the soil from the
carpet so it can be removed. There are 4 keys to soil suspension:
temperature, agitation, chemical action, and time. If one of these
four are missing or decreased, then you need to compensate for it
by increasing one of the other three. For example, if you don't
have enough heated water, then you can compensate with additional
agitation.
Bio Diesel From Algae 3. Soil removal (extraction). This is accomplished by rinsing
(steam cleaning or hot water extraction method), absorption (spin
bonneting), or after-drying (dry powders that are vacuumed up).
Biodiesel Fuel From Algae 4. Rake the carpet so that wand marks or swirl marks are
removed.
Algae Into Fuel 5. The last step is drying the carpet. This needs to happen as
quickly as possible in order to avoid problems such as re-soiling,
mildew and odor. The fastest way to dry carpet is with fans or air
movers. Understanding soil and what it takes to remove it properly
from carpet is the first step to providing carpet cleaning services
in your business. And when removed properly, results in satisfied
customers.
Algae Fuel Source
------
Algae Gas Steve Hanson is co-founder of
TheJanitorialStore.com, an online community for
owners of cleaning companies. Sign up for Trash Talk:Tip of the
Week at http://www.TheJanitorialStore.com . Read
success stories at http://www.cleaning-success.com .
[ Comment, Edit or Article Submission ]
